+1 503 501 9106 info@nitroheat.com

MAXDRY 5200

The MaxDry5200 combines high performance 5 stage filters, a regulated membrane dryer and compressed air heater to produce clean, dry and heated compressed air.

The 5-stage filter includes a water separator, coalescent filter and 3 x active carbon cartridge. This ensures that all impurities are removed from the compressed air before proceeding to the membrane dryer.

The membrane dryer reduces the relative humidity to below 5% to supply clean, dry air to the heater and spray gun. The built in electronics control eliminates air loss by limiting operation to airflow.

The first of its kind in the industry Android application can be used to remotely control the system with a tablet or a smart phone. Built in temperature controllers are also available for this model

THERE IS NO BETTER SOLUTION FOR CLEAN, DRY AND HEATED COMPRESSED AIR

  • Spray painting of paint (base and clear coats),
  • Adhesive / glue (improved curing time),
  • Gel coat,
  • Polyurethane

Water Separator with Pneumatic Drain – for compressed air heater

  • Removes large amounts of moisture (Up to 1 quart of water/oil per min.)
  • Unique up-flow separation takes place as air reverses direction 180° and passes through a special stainless steel mesh element
  • Integral float drain ejects water and oil from large drain sump before supply to membrane dryer and compressed air heater
Specifications
Flow Rating: 50 scfm
Port Size: 1/2″ NPT
Max. Pressure: 250 psi
Max. Temp.: 200 °F
Length: 14.25 in.
Width: 2.375 in.
Weight: 3.25 lbs
Drain Type: Float

Oil Coalescing Filter – with Float Drain

Nitroheat Oil Coalescing Filters protect the MaxDry from dirt, water and oils found in compressed air systems. This will also eliminate fish eye found in paint jobs. Nitroheat coalescing filters remove these contaminates at a very high efficiency – up to 99.99% for .01 micron particles and droplets. Air flows from inside the element out. Liquid will release from the filter and drop down to the sump where an automatic drain will eject the collected liquid. We oversize our elements which reduces pressure drop and gives longer life. Typical pressure drops are 1 psig dry and 2 psig wet.

Specifications
Flow: 50 scfm
Port Size: 1/2″ NPT
ISO Class: <1
Micron Rating: 0.01 Micron
Oil Carry Over PPM: 0.001
Max. Pressure: 250 psi
Drain Type: Solenoid
Max. Length: 14-1/4 in.
Max. Width: 2-3/8 in.
Weight: 3.0 lbs
Max. Pressure: 250 psi

Activated Carbon Filter

Nitroheat‘s Activated Carbon filter is designed to go down stream of the coalescing filter. This type of filter is designed to remove oil vapors & odor. Ensures that the air entering the membrane is as clean and dry as possible.

Specifications
Flow: 50 scfm
Port Size: 1/2″ NPT
ISO Class: <1
Micron Rating:
Oil Carry Over PPM: 0.003
Max. Pressure: 250 psi
Drain Type: none
Max. Length: 14-1/4 in.
Max. Width: 2-3/8 in.
Weight: 3.0 lbs
Max. Pressure: 250 psi